W h/WindowsUpdates Windows 10 and 11 · 1 members · Updates that fail, loop or break something on Windows 10 and 11.
Solved
PC stuck on “Working on updates, don’t turn off your computer”

It’s been on that screen at 30% for over two hours. Is it safe to turn it off?

Accepted answer· CleverHeron (AskBuzzy team)

Give it a little longer first: big updates on older hard drives can take 2–3 hours. If the disk light isn’t blinking at all and nothing has changed for a long time: 1. Hold the power button to turn it off, then turn it on again. Windows usually either continues or rolls the update back. 2. If it loops on the same screen, interrupt startup three times in a row (turn off during the Windows logo). Windows opens Recovery. 3. Choose Troubleshoot > Advanced options > Uninstall Updates > Uninstall latest quality update. Once you’re back in, run the update again later with nothing else plugged in (USB drives can cause hangs).

1 0
Solved
Update fails with 0x800f0922 every time

The same cumulative update downloads, installs to 100%, then rolls back with error 0x800f0922.

Accepted answer· CleverHeron (AskBuzzy team)

0x800f0922 usually means Windows couldn’t write to the small recovery or system partition, or a VPN blocked the update service. 1. Disconnect any VPN and try the update again. 2. Open Command Prompt as administrator and run these two, one after the other: DISM /Online /Cleanup-Image /RestoreHealth sfc /scannow 3. Restart and try the update again. 4. If it still fails, download the same update by its KB number from the Microsoft Update Catalog and install it manually. If it fails even manually, the recovery partition is likely too small; that’s a bigger fix, so post the KB number here and we can go through it.

1 1
Solved
After an update my laptop has no sound

Yesterday’s update finished and now there’s no audio. The speaker icon has a red X.

Accepted answer· CleverHeron (AskBuzzy team)

An update most likely replaced your audio driver. 1. Right-click the speaker icon > Sound settings and check the right output device is selected. 2. Open Device Manager > Sound, video and game controllers, right-click your audio device > Properties > Driver > Roll Back Driver (if available). 3. If you can’t roll back, choose Uninstall device (tick “delete the driver” if offered) and restart. Windows reinstalls a working driver. 4. For the best result, install the audio driver from Lenovo’s support page for your exact model. To stop Windows Update replacing it again, keep the Lenovo driver installed; Windows usually leaves a newer manufacturer driver alone.

1 1
Solved
Windows Update stuck at 0% downloading for days

Settings shows an update “Downloading – 0%” and it never moves. Restarting didn’t help.

Accepted answer· CleverHeron (AskBuzzy team)

Reset the update cache: 1. Run Settings > System > Troubleshoot > Other troubleshooters > Windows Update first. It fixes this about half the time. 2. If not, open Command Prompt as administrator and run: net stop wuauserv net stop bits 3. Rename the folder C:\Windows\SoftwareDistribution to SoftwareDistribution.old. 4. Back in the admin Command Prompt run: net start wuauserv net start bits 5. Check for updates again. Windows rebuilds the folder and downloads fresh. Also make sure you have at least 20 GB free on C:, since big updates silently stall when space is low.

1 0
Solved
Can I safely delete the Windows.old folder?

After upgrading there’s a Windows.old folder taking 25 GB. Is it safe to remove, and how?

Accepted answer· CleverHeron (AskBuzzy team)

Yes, as long as the new version is working and you don’t need to go back. 1. Open Settings > System > Storage > Temporary files. 2. Tick “Previous Windows installation(s)” and click Remove files. Don’t delete Windows.old by dragging it to the Bin; it’s protected and only partly deletes. Note that after removing it you can no longer roll back to the previous version, which is normally only possible for 10 days anyway.

1 0